Gems FT-330 Series Turbine Flow Meter

The Gems FT-330 series are highly accurate and repeatable turbine flow sensors designed for low flow OEM applications. This low-cost meter is ideal for water or beverage dispensing applications or any application with water based liquids. The 316SS shaft coupled with Delrin bearings allows for accurate measurements during quick dispensing cycles. The sensor' s standard power and output specifications make it easy to retrofit existing controllers. The FT-330 is NSF Std. 61 listed. The FT-330 series has a 3/ 8" NPT port for flow rates from 0.2 to 4.0 gpm. Basic accuracy is ± 2% of reading. The FT-330 features a simple and reliable design suitable for pressures to 200 psig and temperatures to 176° F. Features Manufactured by Gems Sensors & Controls Low Flow Rates of 0.2 to 4 GPM Accuracy: ± 2% of Reading Repeatability: ± 0.5% of reading Overmolded Electronics with Integral Cable Strain Reinforcement Inlet/ Outlet Ports: 3/ 8Ý NPT Male Pressure: 200 PSIG ( Operating) ; 1000 PSIG ( Burst) Operating Temperature: -4 to 176° F Viscosity: 32 to 81 SSU Recommended Filtration: < 50 Microns Input Power: 5 to 24 VDC @ 8mA Output ( Hz) : NPN Sinking Open Collector @ 25mA Maximum leakage current 10¼ A ( 5k to 30k Pull-Up Resistor Required) Electrical Connection: 3 ft PVC cable # 22 AWG Approvals: NSF Std. 61 listed